I have an LA145, about 6 yrs old. While mowing the other day, the blades just stopped. I know I didn't hit anything, but I thought I heard a "clunk" or "thump" just as the blades stopped. The belt and tension is fine and so is the battery, so I started to look at the PTO switch. Attached a new one to the connector, still nothing going on with the blades. I disconnected the wiring harness from the clutch, had my wife sit on the machine and start it, and put a voltage tester into the 2 cavity harness that I just disconnected from the clutch. When the PTO switch was engaged, it showed 12 volts at the terminal. So now I'm thinking bad clutch. Bought a new one, installed it, and still no blade action. I have no idea what to do next. Any help or advice will be greatly appreciated.
Thanks in advance
Mart
Thanks in advance
Mart